07-30-2021, 06:53 AM | #23 | |
New Member
0
Rep 7
Posts |
Quote:
It worked. I must have read the thread a little to fast. Just went directly at the coding part. The change from 4_sensoren to kein_sensoren seemed kinda strange |
|
Appreciate
0
|
03-11-2022, 01:44 PM | #24 |
New Member
0
Rep 8
Posts |
Hi friends, I have installed the rear sensors on my f20 from scratch, I have problems with the 507 encoding or the hu_entry gives me an error and no longer recognizes me the cafd. So I would like to activate each value manually.
I use esys and until recently I was able to start only the sound of the sensors, then after several attempts I also saw the image in the monitor but it was all wrong and with errors I had to restore via backup but above all through the user shawnsheridan that I saved the car. But now I can't figure it out, you who have already done this, could you tell me the codes to set correctly starting from scratch? Thank you guys. |
Appreciate
0
|
05-13-2022, 10:34 PM | #25 | |
New Member
0
Rep 17
Posts |
Quote:
|
|
Appreciate
0
|
05-14-2022, 06:07 AM | #26 |
New Member
0
Rep 17
Posts |
I’ve got a person to code my pdc , he did it on ista , and they are not working . When I change provided values to 01 the rear pdc start working but not front ones , when i change values to 02 they are not working at all
Last edited by darakuja; 05-14-2022 at 09:49 AM.. |
Appreciate
0
|
07-03-2022, 07:42 PM | #27 | ||
Private First Class
33
Rep 144
Posts |
Quote:
|
||
Appreciate
0
|
09-05-2022, 11:13 AM | #28 |
Registered
0
Rep 4
Posts |
Code in my Rear backup Camera and PDC
[QUOTE=jaypayne05;25143012]So I did it and it worked perfectly. Thank you very much.[/QUOSo I was wondering if i could pay you to code that in for my f30 as well. i dont wanna mess with the advanced coding like that.
__________________
Antoniohakim
|
Appreciate
0
|
09-05-2022, 11:15 AM | #29 |
Registered
0
Rep 4
Posts |
Could u send me his link i need to do this as well.
__________________
Antoniohakim
|
Appreciate
0
|
02-07-2023, 12:28 PM | #30 | |
New Member
17
Rep 20
Posts |
Quote:
Hey thanks so much for posting this. EXTREMELY helpful. I'd been searching the internet for the last month looking for a way to do this. One of my front sensors started to go bad, and as you can imagine, having the PDC screaming at you when you're going in reverse isn't exactly pleasant. Can confirm this coding worked on my 17 440i. Thanks so much! |
|
Appreciate
0
|
03-28-2023, 07:06 PM | #31 | |
New Member
0
Rep 5
Posts |
BMW F36 PDC Help
Hi there, I purchased a crash damaged BMW F36 2015, front PDC were missing so replaced all front and loom. Still have no luck and Idrive shows all PDC failures but the computer diagnostic only shows all front sensors as no read but no errors for the rear. Am I able to use the following you mentioned on bimercode to deactivate front sensors so Idrive won't show error and back ones will end up only working? Not fussed about the front, just want the error to go and rears to work.
Thanks in advance! Quote:
|
|
Appreciate
0
|
05-02-2023, 02:05 PM | #33 |
New Member
0
Rep 5
Posts |
I retrofitted my PDC Front F20.
Now it is off by default and only works if I turn it on via the button on the console or when I engage reverse gear. I would like it to stay on all the time. Does anyone know how to code? |
Appreciate
0
|
07-16-2023, 11:43 AM | #34 |
Registered
0
Rep 2
Posts |
[QUOTE=atzebmw;25141180]Ah OK.
VO is the vehicle order which you can't edit with Bimmercode. No, if you use Bimmercode then go another way. Try to change the following values if you find them: in REM: PdcParkMasterVar 3203 > A_HYSTERESE = wert_02 to wert_01 PdcParkMasterVar 3203 > D_SCHWELLE_1 = wert_02 to wert_01 PdcParkMasterVar 3203 > D_SCHWELLE_2 = wert_02 to wert_01 PdcParkMasterVar 3203 > V_SCHWELLE_1 = wert_02 to wert_01 PdcParkMasterVar 3203 > V_SCHWELLE_2 = wert_02 to wert_01 PdcVarCoding 3200 > PDC_VARIANT = wert_02 to wert_01 in HU EXBOX 3001 > PDC_SENSOR_VORN = 4_sensoren to kein_Sensor[/QUOTE Hello, I know it's been a while on this but I recently needed to code out my front pdc sensors and I tried this on bimmer code step by step, added this as well ( ICMQL Daten 3000 > IcmKod_B_S508A = nicht aktiv) and it doesn't seem to work for my car even tho it's pretty much identical to the one it worked on in this post. I have a 2016 435i m package.. any idea what I could be doing wrong? I should probably also mention that my car is xdrive coupe not grand coupe, if that makes any difference.. Thank you in advance. Last edited by Amer_n55; 07-16-2023 at 12:05 PM.. |
Appreciate
0
|
07-19-2023, 11:01 AM | #36 |
Registered
0
Rep 2
Posts |
I'm using bimmercode.
I was trying different things today and I realized that I was able to code out front pdc yet I was still getting the warning on startup or when the speed goes below 15km/h. I even coded out rear pdc and was still getting the same warning! All cameras were still working fine. Not sure what the problem is. At this point wondering if I can code out the warning only, btw the warning I'm getting is (parking assistance malfunction: please park unaided)... |
Appreciate
0
|
09-18-2023, 08:31 PM | #38 |
New Member
0
Rep 8
Posts |
Hello group
Anybody know how to program the pdc or what are my options to fix this? Error: Ultrasonic sensor, front outer left, sensor fault: Programming Thanks |
Appreciate
0
|
09-24-2023, 04:40 AM | #43 | |
New Member
2
Rep 6
Posts |
Quote:
Thanks for posting this. I can confirm it works perfectly on my 2017 320i. My front PDCs aren’t working, and I have had to always press the idrive control knob to ignore the pdc error message every single time I put the gear in reverse for the rear camera to come on. With this coding, I was able to delete out the front pdc and now. Once I put the car in reverse, the rear camera comes on immediately without any error message. The rear pdc still working. Perfect solution for me. I used BimmerCode |
|
Appreciate
0
|
05-08-2024, 06:34 AM | #44 | |
Registered
0
Rep 1
Posts |
Quote:
this worked, thank you. |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|